home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
CD Pro
/
CD Pro.iso
/
Lan
/
Intel558
/
INFO
/
NETWARE
/
NWNTREQ.TXT
< prev
next >
Wrap
Text File
|
1997-06-25
|
4KB
|
101 lines
7 Workstation: Windows NT with NetWare Client Services
v1.05
Windows* NT* 4.0 and Novell NetWare client Services driver installation
notes for Intel's EtherExpress(TM) PRO/100+ adapter
=====================================================================
Location of driver: \NWSERVER\E100B.LAN
\NWSERVER\OEMSETUP.INF
General instructions for Novell NetWare* Client Services under Windows NT
using the ODI server driver.
=========================================================================
1 Install the Novell NetWare Client Services per the instructions
provided by Novell.
Note: If the NDIS driver for the PRO/100+ is installed and you want to
us the NetWare 32 ODI LAN driver, remove the NDIS driver from NT
before going to step 2. Novell NetWare Client service can be
run with the NDIS 3 driver.
2 Start Windows NT and log in as ADMINISTRATOR (or another valid user
name).
3 Double-click the "Network" icon in the Control Panel. The "Network
Settings" screen appears.
4 Select the Adapter tab.
5 Click the "Add" button.
6 Click the Have Disk button.
7 Insert the Intel Configuration and Drivers Disk into your floppy drive
and type A:\nwserver. Click OK to continue.
8 When "ODI Intel EtherExpress PRO/100+ adapter for NetWare" appears,
click OK.
9 After the files are copied, the default driver settings will be
displayed (they'll be displayed with their defaults which in most
cases is OK). Click OK when correct.
NOTE: Do not click on Advanced Settings. See the section titled
Advanced Setting below.
Speed: Specifies the line speed of the adapter.
0 = Auto detect (default)
10 = 10 Mbps
100 = 100 Mbps
ForceDuplex:
Note: The PRO/100B T4 adapter does not support full duplex at 100
Mbps. It does at 10 Mbps. The PRO/100+ TX adapter supports full
duplex at 10 and 100 Mbps
0 = auto-negotiate (default)
1 = half duplex
2 = full duplex
Note: If the adapter is set to half or full duplex, set the SPEED
parameter to either 10 or 100. (see SPEED)
10 You will have to restart Windows NT to complete the installation.
Advanced Settings
=================
Only select Advanced Settings if you want to use local Administration of
Addressing or use multiple Intel EtherExpress PRO/100+ adapters. Entering
Advanced Setting requires that you know the slot number the adapter is
using.
1 To get to Advanced Setting from the Network Dialog box selected the
Adapters tab and highlight the ODI Intel EtherExpress PRO/100+ adapter
and click Configure.
2 Click Advanced.
3 There are 2 advanced options, Node Address Override and Slot.
NODE ADDRESS OVERRIDE: Use this option to provide your own unique node
address for the adapter. The node address is a 12-digit hexadecimal
number; the second digit must be one of the following digits: 2, 6, A,
E.
SLOT: Select the slot number the adapter is in. Only necessary if
multiple PRO/100+ adapter cards are being used. Before clicking OK,
you must enter a valid slot number. To exit without saving a slot
number, click Cancel.
* Third-party trademarks are the property of their respective owners.